High Average Power Field Emitter Cathode and Testbed for X/Ku-Band Cold Cathode TWT

Citation

Whaley, D., Duggal, R., Armstrong, C., Holland, C., Spindt, C., & Thibert, D. (2013, 21-23 May ). High average power field emitter cathode and testbed for X/Ku-band cold cathode TWT Paper presented at the IEEE International Vacuum Electronics Conference (IVEC2013), Paris, France.

Abstract

A new field emitter geometry that utilizes a dielectric shield between the emitter tip and gate has been optimized to eliminate flashover in the cathode emitter cavities and improve cathode reliability. A high average power testbed has been designed and fabricated to test these cathodes at currents and current densities required for TWT operation in the X/Ku-Band frequency regime. Experimental tests in the water-cooled testbed demonstrated a record 100 hours of CW operation at 100 mA. A 200 mA X/KuBand TWT was designed to integrate these cathodes and to provide RF gain and power across the entire 6 – 18 GHz frequency band. Preliminary results taken at a cathode current of 50 mA show excellent focus of the emittance-dominated electron beam. RF results at 50 mA demonstrated positive gain over the entire frequency band with a maximum of 13.5 dB gain and 10 W output power at 10 GHz and low duty. Cathode testing as well as TWT design and preliminary operation will be described.


Read more from SRI

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.